|
|
Flange Tools
Pipe Flange Aligner
|
T110—#10
Pipe Flange Aligner Construction: Light Weight Aluminum Price: $111.85 |
| Fast, accurate pipe construction is possible with this self-determining flange aligning tool. The Aligner inserts easily into pipe, centers snugly against the inside pipe diameter and automatically aligns with the pipe axis. The Pipe Flange Aligner is quickly adjustable for all types of flanges or pipe sizes ranging from 3 to 12 inch diameter. |
Dial-Angle-Flange Level
|
T111—#20
Curv-O-Mark® Dial-Angle-Flange Level Construction: Light Weight Aluminum Price: $101.19
|
| A versatile tool that can be used as a dial degree utility level or, with attachments, for two-holing flange alignment. The unit is made of cast aluminum with a protective housing containing an adjustable DSL. It is also fitted with a threaded, self aligning conical spacer and conical nut and bolt units for fastening the Level to a pipe flange. One of the nut and bolt units is stationary, while the other slides up to 5-1/2 inch along a slot in the level to accommodate various flange bolt hole spacings from 2 to 5-1/2 inches. The body of the tool is 1/2 inch thick with a machined surface. The level bubble is protected from weld splatter and breakage with a built-in housing around the DSL. |
Flange Aligner Base
|
T112—#32
Curv-O-Mark® Flange Aligner Base Construction: Light Weight Aluminum Price: $117.25
|
| Remove the difficulty of flange aligning and squaring with a simple tool that holds a square in the needed position without tying up one's hands. The Curv-O-Mark Aligner Base is notched at either end for ease in aligning on the centerline of the pipe and has two 25-pound pull, cast-in magnets for holding either a flat horizontal or vertical position. The Base will accept either leg of a standard or combination square and will work on pipe diameters from 1 inch on up, requiring only the extension of the legs of the square being used to accommodate larger diameters. The Flange Aligner Base is made from lightweight, durable aluminum. |
Universal Level
|
T109—#33
Curv-O-Mark® Universal Level Construction: Light Weight Aluminum Price: $130.00
|
|
The Curv-O-Mark®
Universal Level is a multi-purpose tool. The unit features a 360-degree
adjustable protractor dial bubble (DSL) that ensures accurate leveling
and permits the following additional uses: The Level has two
cast-in 25-pound magnets (exerting a 50-pound pull) to securely hold
the unit in place on any steel surface, including the underside of a
pipe or beam. This permits hands-free leveling, a welcome aid in tight
spots. And, since the bubble is mounted on a protractor dial, the Level
may be used in any position and still read accurately. While one face
of the Level is magnetic, both faces have deep, cast-in grooves that
make the Level self-centering on the contour of the pipe. Because the
magnets are cast in, they do not interfere with the use of the Level
on non-magnetic materials, such as aluminum, copper, lumber, stone or
other materials requiring leveling. For aligning pipe
flanges (two-holing), the Level comes with a two-threaded, self aligning
conical spacer and conical nut and bolt units. These are designed to
fit any size bolt hole spaced between 2-1/4 inch to 8 inch centers on
flanges. This permits the orientation of flange bolt holes for any size
pipe. Designed primarily
for pipefitting applications, the Universal Level is a valuable tool
for any craft required to use a level or a plumb bob: A built-in adjustable
dial bubble protractor ensures accurate centerline location. A cast-in
table indicates rise per foot in both inches and meters. A cast-in grooves
makes the level self centering on the contour of pipe. Two-holing is simplified
with the Universal Level. Self-aligning spacer bolt units are attached
in the two adjacent bolt holes at the top or bottom of the flange With
the DSL dial set at O degrees, the flange is rotated until the bubble
is centered. If adjacent top
or bottom holes cannot be used, two-holing can be achieved using side
bolt holes. In this instance, the DSL dial is set at 90 degrees and
the flange is rotated until bubble is centered |
