Pipefitter.com

Home  •   Catalog  •   Tools  •   Books


Contour
Levels
Pro-Mag Level
  T108—#8 Pro-Mag Level
     Construction: Light Weight Aluminum
     Price: $76.70  
    Replacement Parts
   T145— R00 Dial & Level Combination(DSL)
    Price: $29.90  
A lightweight, easy to use tool for determining angles, the Pro-Mag Level has two cast-in 25-pound pull magnets that hold securely to any steel surface. The unit has a 360-degree adjustable DSL with two 90-degree quadrants graduated in 2-1/2-degree increments. Also cast in are tables used to convert degree-of-angle to rise-in-inches-per-foot or millimeters-per meter. A groove on the bottom edge permits use on a small pipe.
The Pro-Mag Level is 9 inch long, 2 inch high and 3/4 inch thick. It is made from cast aluminum. The unit is ideal for pipefitter, welder, jig builder or anyone who has to determine angles or do setup work.
A built-in adjustable dial bubble protractor ensures accurate centerline location. A cast-in table indicates rise per foot in both inches and meters. A cast-in groove makes the level self centering on the contour of pipe.
Universal Level
T109—#33 Curv-O-Mark® Universal Level
       Construction: Light Weight Aluminum
       Price: $130.00  
    Replacement Parts
    T145—R00 Dial & Level Combination(DSL)
    Price: $29.90  
   T147— R02 Centering Bushing Set
    Price: $55.35  

The Curv-O-Mark® Universal Level is a multi-purpose tool. The unit features a 360-degree adjustable protractor dial bubble (DSL) that ensures accurate leveling and permits the following additional uses:
° Setting a predetermined pitch of a string of pipe
° Setting the angle of laterals to a precise degree
° Trueing vertical runs
° Two-holing flanges
The Level has two cast-in 25-pound magnets (exerting a 50-pound pull) to securely hold the unit in place on any steel surface, including the underside of a pipe or beam. This permits hands-free leveling, a welcome aid in tight spots. And, since the bubble is mounted on a protractor dial, the Level may be used in any position and still read accurately. While one face of the Level is magnetic, both faces have deep, cast-in grooves that make the Level self-centering on the contour of the pipe. Because the magnets are cast in, they do not interfere with the use of the Level on non magnetic materials, such as aluminum, copper, lumber, stone or other materials requiring leveling.

For aligning pipe flanges (two-holing), the Level comes with a two-threaded, self aligning conical spacer and conical nut and bolt units. These are designed to fit any size bolt hole spaced between 2-1/4 inch to 8 inch centers on flanges. This permits the orientation of flange bolt holes for any size pipe.

Designed primarily for pipefitting applications, the Universal Level is a valuable tool for any craft required to use a level or a plumb bob:
° For structural ironworkers, the powerful holding magnets provide an extra hand
° Electricians will find the Level useful in laying out and lining up heavy conduit
° With the aid of a handy conversion chart, carpenters can use the Level for the layout of roof rafters

A built-in adjustable dial bubble protractor ensures accurate centerline location. A cast-in table indicates rise per foot in both inches and meters. A cast-in grooves makes the level self centering on the contour of pipe.
Two-holing is simplified with the Universal Level. Self-aligning spacer bolt units are attached in the two adjacent bolt holes at the top or bottom of the flange With the DSL dial set at 0°, the flange is rotated until the bubble is centered.

If adjacent top or bottom holes cannot be used, two-holing can be achieved using side bolt holes. In this instance, the DSL dial is set at 90° and the flange is rotated until bubble is centered.
Bolt holes that are offset can be matched by setting the DSL at the desired offset angle prior to rotating the flange.